Q_Liberator V3.46 ================= The Qlib compiler and compiler source code. This distribution comes in the basic form of two disks: 1. Qlib346u is a 720k floppy containing all you need to compile and run Q_Liberator V3.46. The u stands for User. It is distributed thus: Qlib346ui.zip is the zipped version of an image of this disk. Once unzipped, the image can be mounted directly into most emulators and the software run from there. Qlib346ud.zip is the zipped contents of the User disk. Unzip it to a suitable location yourself, such as a floppy disk or hard drive. The device's driver must support directories! Qlib346u.zip is the zipped contents of the User disk without directories. Unzip it to a suitable floppy or RAM disk (it wont fit on a microdrive!) 2. Qlib346s is a 1440k disk containing the Q_Liberator source files. It is not required to compile or run Qlib programs. It is to better understand Qlib and, hopefully, contribute towards future updates and improvements. The s stands for Source. It is distributed thus: Qlib346si.zip contains the 1440k floppy image of the source disk. Once unzipped, the image can be mounted directly into most emulators and used from there. Qlib346sd.zip contains the contents of the Qlib346s source disk and can be unzipped to any suitable location, like a subdirectory on your hard disk. Note: The zipped image files (*ui.zip and *si.zip) should be unzipped using an external unzip utility, ie from Linux, Windows, etc. The remaining zip files are QL files and should be unzipped in a QL environment with a suitable QL unzip utility. pjw, March 2024++